Magnetic separation equipment, dry magnetic separator, magnetic separator magnetic separation equipment for reusing iron powder in powder granules, etc., [url=http://] magnetic separation equipment [/url] is widely used in resources Recycling, wood industry, mining, kiln, chemical, food and other workshops, suitable for wet magnetic separation of magnetite, pyrrhotite, roasting ore, ilmenite and other materials with a particle size of 3mm or less, also used for coal, The iron removal operation of non-metallic minerals, building materials and other materials is one of the most widely used and highly versatile models in the industry. Here is how to achieve energy saving and consumption reduction for magnetic separation equipment? Horizontal Deep Hole Drilling Machine Horizontal Deep Hole Drilling Machine,Deep Hole Drill,Cnc Deep Hole Drilling Machine,Deep Hole Drilling Machine Shandong EN FIN CNC Machinery Co., Ltd , http://www.sdfincnc.com
1. Adjust the height of the iron ore dry sorter
The separator of the iron ore dry sorter directly affects the sorting effect of the [url=http://] dry magnetic separator [/url], and the separator plate is too low, so that the extremely poor magnetite nuggets cannot be obtained. Better recovery reduces the utilization of ore resources; the partition plate is too high, and the gangue minerals are not completely thrown, which affects the sorting effect of the dry magnetic separator. According to the specific circumstances, the height of the dry-selected material-receiving plate is adjusted, so that the dry-selection can ensure a certain throw-off ratio, and the non-magnetic mineral can be better thrown.
2, adjust the distance between the dry selection of the material distribution plate and the magnetic separator magnetic roller
The distance between the material distribution plate and the magnetic roller is an important parameter in the pre-selection process. The smaller the distance between the separation plates, the better the recovery of the poor magnetite ore, the lower the utilization rate of the ore resources; The larger the distance, the better the separation of gangue minerals, and the lower the grade of grinding, which is not conducive to the efficiency of grinding. According to the nature of the ore and adjusting the distance between the separation plate and the drum, the gangue is fully thrown, and the full recovery of the magnetic product is ensured to ensure the recovery rate of the dry concentrate.
3. Increase the material layer leveler and try to make the dry material selection layer thin and uniform.
Permanent magnet dry-type magnetic separator, the farther away from the surface of the cylinder, the stronger the magnetic attenuation, the thicker the material will cause the magnetic particles and non-magnetic particles to be mixed with each other, affecting the sorting effect of the ore, if the particles can be realized in the belt The upper single layer distribution is ideal. It is required to increase the material layer leveler before dry selection, and make full use of the effective width of the belt to make the dry material selection layer thin and uniform, and ensure the dry selection effect.
For more information please see:
[url=http://]http://[/url]
Http://news.chinawj.com.cn Submission:
Analyze how magnetic separation equipment saves energy and reduces consumption