One, out of power When you find someone is getting an electric shock, don't panic. First cut off the power as soon as possible. Note: The ambulance person must never directly pull the person who has received the electric shock to prevent the electric shock accident of the rescuer. Way out of power. According to the specific conditions on the site, decisive measures and measures should be taken. Generally, there are the following methods and measures: 1. If the switch or button is in close proximity to the location of the electric shock, the switch should be quickly pulled open to cut off the power. And should be prepared for adequate lighting for rescue. 2. If the switch is far away from the location of the electric shock, use an insulated pliers or axe, knife, shovel, etc. with a dry wooden handle to cut the wire. Note: The power-side (ie, incoming-side) wires should be disconnected and the cut-off wires must not touch the human body. 3. When the wire is placed on an electric shocker or under the body, use a dry wooden stick, wood board, bamboo rod, or other tool with insulated handle (hand grip) to quickly open the wire. Note: Do not use any metal rods or wet things to pick wires to avoid electric shock to the ambulance. 4. If the electric shocker’s clothes are dry and not tightly wounded, the ambulance personnel can stand on a dry wooden board, or use a dry coat, a dry scarf, etc., to put one's own hand into a strict insulation package, and then use this A hand-pulled person's clothes pulled him away from the electrified body. Note: Do not use two hands, do not touch the person's skin, can not pull his feet, and only adapt to low-voltage electric shock, must not be used for high-voltage electric shock rescue. 5. If the person gets an electric shock at a higher place, protective measures must be taken to prevent the electric shocker from falling off after a power cut. Second, the treatment of the wounded from power 1. Those who are electrocuted, such as those who are conscious, should be allowed to lie down on the spot and be closely monitored. Do not stand or walk for the time being. 2. If the person with electric shock is unclear, he should lie on his back and ensure the airway is open. He should call the wounded person or tap his shoulder with an interval of 5 seconds to determine whether the wounded person has lost consciousness. It is forbidden to swing the wounded head to call the wounded. Adhere to the correct rescue on the ground, and contact the hospital as soon as possible to rescue. 3, breathing, heartbeat judgment If the electric shocked person suffers from loss of consciousness, the breathing situation of the wounded should be judged by watching, hearing and trying within 10 seconds. Look: See if there is any undulating movements in the chest and abdomen of the casualty. Listen: The ear is close to the wounded person's mouth, listening for breath sounds. Test: Test whether the nose and mouth have breathless airflow. Then use two fingers to test whether the carotid artery in the depression beside the side of the throat is pulsed. If the result of seeing, listening, or testing is that there is no respiration and no arterial pulse, it can be determined that the respiratory heartbeat has stopped and the cardiopulmonary resuscitation method should be used immediately for rescue.
LED grow lights are relatively new to the cannabis growing scene,but they have become wildly popular over the last few years with their ability to produce great yields while staying cool and using a reasonable amount of electricity.
Choose LED grow lights if...
You want to use the most cutting-edge indoor cannabis grow lights with a customized spectrum of light
You are willing to do some research to determine the best LED Grow Light for your space
You have some extra money to spend on your initial setup (some of the best LED grow lights are expensive!)
Quality (potency, smell, trichome development) is more important to you than yields/watt.
You don't want to deal with an exhaust system or ducting,and would prefer to just hang your grow light over your cannabis plants and let the lights cool themselves
Features
Product Images
The Plug you can choose
PAR Value of our 2000W LED Grow Lights
Applications
Our professional full spectrum COB LED Grow Light are suitable for all the indoor plants and good for seeding, growth,flowering and fruiting stages of plants, increasing the harvest and Saving energy.
Our Ageing Test
Package
Cautions:
1.Do not use the lights in dripping water or anywhere where they will get wet, water and electricity can be a dangerous mixture
2. The working environment for the light is -20~40 degree celsius,45%RH~90%RH.
3. To protect the light, Plz cut off the power when there is a lightning strike.
4. Don`t touch or move when the light working.
Suggestions:
1.Clean the dust inside every 6 months to ensure the good heat dissipation and long life time.
2.Don`t keep too short distance to the plant canopy to avert leaves bleaching.
3.Highly hang the lamp will weaken the energy and affect the growth cycle of the plants, so the lamp should not be hang too high.
4.While taking care of the plants, please spray the leaves and branches 2-3 times everyday, to ensure the plants do not wrinkle a wither, and have no phenomenon of few fruit, and hard pericarp.
Philizon have over 6 years' experience in designing and manufacturing led grow lights and LED Aquarium Light. Persuiting to offer the best LED grow lights for plants growth,we cooperate with the scientific research institutes and the Academies of Agricultural Sciences in USA, Australia Canada, UK and so on.A great number of commercial plant growers test the lights, and their feedbacks show that this lamp owns a lot of 640nm,660nm and 740nm lights, which gives the plants enough nutrient in the flowering and fruiting phase and bring a far higher yield than other led grow lights in the market.
Full Spectrum Grow Lights,Flowering Plant Grow Light,Flowering Led Grow Light,Grow Lights Full Spectrum Shenzhen Phlizon Technology Co.,Ltd. , https://www.szledaquariumlight.com
Deep penetration :Good lighting penetration,can penetrate to the deep of the plants
Modular Internal Build: Fully upgradable,easy warranties
Thermal Management:Custom copper core heatsinks quickly dissipates heat for cool operating temperatures
Powerful: 2nd Generation ultra penetration 5W LEDs light deep into the canopy
Versatile: Power cord available in 85~265V and international plugs
Lighter weight: Much lighter than the same products in the marketplace, safer for hanging .
Plants: Suitable for both vegetative phrase and flowering phrase
Emergency handling of electric shock accidents
News Related Keywords: No tags.