Waxing is divided into: playing solid wax and liquid wax two. The waxing of the floor requires professional waxing. The wax layer and the wax liquid must be distributed evenly and the thickness is moderate, so as to achieve a bright and smooth floor. Today Xiao Bian brings you the knowledge of what to use for floor waxing.

Clear stubborn stains on the floor, by waxing the material itself and the air to reduce the damage caused by oxidation or exposure to harmful substances in the air, to extend the life of the material and the purpose of the United States to clean. What is more important is that the mirrored surface it forms is particularly durable and can prevent detergent, scratches, scratches, heel friction, etc., while the polished wax surface is harder and more durable.

Floor waxing method:

1. Clean up the garbage and debris on the ground and erect a construction sign. Wipe the stain on the floor with a diluted neutral detergent. For difficult-to-remove stains, please clean with water. To prevent the detergent from accumulating in the grooves, the rag soaked with detergent should be wrung out as much as possible. Floor wax scavengers can cause floor stains and bulging and must not be used.

2. Clean the floor with a neutral detergent and a floor washer. Wipe with a well-wrung rag. The surface of the floor, especially the grooved part, should be carefully wiped and there should be no residual detergent. If there is residual detergent and moisture, the surface will be whitened and bulging.

3. Dry the floor with a dry towel or wait for it to dry naturally. Dry the surface of the floor and the water in the groove fully dry enough for waxing. According to the season, the time required will change, but it will take more than half a day. If not fully dried, the floor wax will not adhere closely to the floor surface, affecting the appearance and causing whitening.

4, wait until the ground is dry, and then evenly wax the surface. Shake the container with floor wax and stir well. Apply it carefully in the direction of the wood grain of the floor, without missing paint or uneven thickness. Excessive smearing will cause uneven shades and excessive smearing that will result in poor film formation. Keeping thin and even is the key to waxing. Do not dilute the floor wax with water. Waxing tools can be used for waxing mop, easy to operate, and ideal results.

5, wait until the wax surface is completely dry, by the professional with a high-speed polishing machine with the polishing pad polishing to the surface brightness can be uniform.

6. The floor after waxing and polishing is bright and clean, and the sensory effect is particularly good. Do not walk on the floor before drying the floor wax. Drying usually takes 20 minutes to 1 hour. If there is a leak, apply it. Such as the use of waxing twice, the second time, after the first complete drying. Wax once every 6 months or so can keep the floor beautiful for a long time.

What wax is used for floor waxing?

For solid wood flooring, solid wax should be chosen to prevent moisture from infiltrating the solid wood floor and acting as dust. However, some cleaning company's waxes are used improperly and react with the paint on the floor surface to cause discoloration. Therefore, as a "waxing" service as a gift, the citizens must be sure about what type of wax is used by the other party. Because for composite flooring, just use liquid wax. Do not pour floor wax directly on the floor during the waxing process of the laminate flooring, as traces and loop marks will be generated.

The waxing process is also stressful. Waxing must choose good weather, humidity in the rain is too high, it will produce white turbidity phenomenon. Before the waxing, the surface of the floor must be cleared of garbage and dust, must use a wringer to wipe, must wait for the floor to be completely dry and then can be waxed. Before the overall floor waxing of the room floor, a local trial shall be made on the floor of the room to make sure that there is no abnormality and that the entire room is waxed. When waxing, carefully apply it according to the direction of the grain, do not paint or uneven thickness, and then use an imported machine to polish and polish. The floor will look brighter.

The above knowledge about wax used for floor waxing is introduced here, and I hope to help everyone. Want to know more relevant knowledge, please continue to pay attention to Qi family information.

Floor cleaning waxing floor what brand of good mahogany furniture with what color floor floor waxing geothermal floor with what good

Door Hardware

Including Door Handles,pull handles,door lever handles,solid door handles,door hinge,door stopper. All of our door hardwares are manufactured in high grade material to ensure its durability. Having stylish design and various surface finishes are available to be chosen, our products can fit every style of both commercial and residential buildings.

To ensure the quality of our door hardware, we have strict quality control from material processing, polishing, assembly and packaging. Extensive experiences, mature technology and professional service allows us to meet the different needs of customers of different regions. Every product comes complete with mounting hardware. Special requirements and sizes are available. Please just feel free to contact us if you have any question. Our team is on call for 24/7 to provide the worry-free before/after-sale service.buildings.

Brass Handle For Door,Pull Handles For Doors ,Slide Door Handles,Door Lever Lock

Leader Hardware Manufacturer Limited , https://www.leaderhardwarecn.com