The renovation of old houses is more complex than the renovation of new houses. It needs to be treated with care. First of all, before the renovation of old houses, we have to conduct an overall inspection of the house and then design and decorate the places that need to be demolished. The following small series is simple: Introduce the precautions for the renovation of the old house .

The old house renovation and transformation note one: monitoring hidden project

Water circuit reconstruction and other hidden projects will directly affect the future use of life. Therefore, it is necessary to guard against sticking during the transformation process. After many years of use, the old house will be old and may leak water. After waterproofing is completed, a 24-hour water-repellent test must be performed to verify that the waterproof layer is intact.

During the decoration process, holes, grooving and other actions may damage the waterproof layer. Therefore, if the second-hand housing is used to remove the decoration steps of the tiles, the water-repellent test should be conducted again to ensure that the original waterproofing is not a problem. After the circuit is completed, it is necessary to check whether each socket, switch can be used normally, and whether the installation position meets the original requirements.

The old house renovation and transformation note two: bathroom drainage can not be arbitrarily changed

Some old bathrooms are side drains, and such toilets have much higher floor height than the living room and bedroom. Once the changes will affect the floor structure of the bathroom, it will even cause inconvenience to the use of the downstairs tenants, so this kind of drainage method cannot be arbitrarily changed. At the same time, if you change your squat toilet to a toilet, you will need to do it again.

The old house renovation and transformation note three: the transformation of old masonry to be cautious

Breaking walls and knocking on the ground are often inevitable projects for the renovation of old houses, but some old houses in brick-concrete structures need to be especially cautious when they are being demolished. The wall of the brick-concrete structure first plays a role in load-bearing earthquake resistance, and secondly, it is the function of enclosing partitions. If only the load-bearing wall is destroyed in order to achieve an ideal spatial pattern, the weight bearing and seismic resistance of the wall will be weakened, resulting in potential safety hazards. Therefore, in the process of demolition, renovation and refurbishment, we must take into account the housing structure and safety issues, and we should boldly innovate on this basis. Otherwise, once we “move hands”, it will cause irreparable damage.

The old house renovation and transformation note four: package heating need to stay cooling holes

Some top floor old houses have heating pipes that affect the interior appearance. The easiest way is to wrap the pipes near the roof as ceilings. It should be noted that the circulation and flow rate of these heating pipes tend to be better than the radiators, so they will make the winter home warmer. Enough heat dissipation holes must be provided to wrap the heating pipes. This will not only allow the hot air to flow out, but also prevent cracks and deformations of the gypsum board ceilings from being “baked” by hot air for a long time.

Information on the renovation of old houses was introduced here for everyone. I hope this article will help you. If you still have anything you don’t understand, you can follow our website and we’ll get back to you as soon as possible.

Old house balcony transformation old room living room 50 flat old room renovation decoration design old bedroom bedroom family old house

Cylindrical Roller Bearing

Cylindrical Roller Bearing,High Temperature Cylindrical Bearing,Precision Cylindrical Roller Bearings,Double Row Cylindrical Roller Bearings

Shanghai Yi Kai Cheng bearing Co., LTD , https://www.ykchbearing.com