Nature Flooring Del Floor Room Home Furnishing Industrial Peristaltic Pump are tested in various pilot or large-scale application scenarios. The flow range is wide, and the pump supports speed regulation, which can meet the needs of customers for various liquid additions. The pump supports external control to start and stop, and customers can control multiple pumps at the same time through PLC, which has reached production requirements. Good electromagnetic compatibility ensures stable and reliable operation. Industrial Peristaltic Pump,Wastewater Treatment Pump,Bioreactor Peristaltic Pump,Big Flow Rate Peristaltic Pump Baoding Chuangrui Precision Pump Co., Ltd. , https://www.chuangruipump.com
539) {this.resized=true; this.width=539;}" border=0>
There are few ways to deal with floor noise. Even if the problem is alleviated after treatment, it cannot be completely cured.
There is a way to completely eradicate the ground, re-tighten the dragons, and re-install the floor. It is really a waste of time and effort. No one wants to counterattack and reload. The floor will not sound until you focus on the following processes and methods before installing the ground dragon and the floor:
1, before the installation of earthworms are generally used 12mm drill hammer drill hole, then wooden box at least 18-20mm above the square wood Morinda is only useful, can not easily hit the hole to go, a few days a wooden shit a dry shrinkage Just
2. The material of the rammedger is harder than that of the earthworm and the hard shrinkage of the wood is small. The worm does not easily pull up the rammer and maintain its stability;
3. Some rooms have a floor level difference of several centimeters. At this time, the master carpenter will put some knife-shaped corks or plywoods under the ground dragon to ensure the level of the ground dragon. Don't forget to raise the floor height by 2.5. Above the centimeter between the earth dragons, short dragons must be fixed with each other to prevent the earth dragons from swinging around to ensure that the earth dragons are firm and firm;
4, when installing solid wood floor drilling, the aperture must be smaller than the floor nails, so that the floor before eating nails;
5, the wall is set aside more than 1 cm above the floor contraction joints, in order to avoid climate change or floor moisture content does not match the expansion of the arch, which most people know. The above techniques seem to be small in detail, and the problem is often in small details that people do not pay attention to. In fact, these nodal skills are an important factor in ensuring the quality of the flooring, and they are also an experience point of reference for the relevant personnel and the users to be installed.
Typical applications: Membrane treatment technology, chemical pharmacy, mining flotation, biological pharmacy, reactor, etc.
There are different sound problems with solid wood flooring
The reason is actually closely related to the dragon and the floor. See how the sound of the squeaking sounds. If a place slams a foot, and then slams, and continues to do so, it is certainly not fixed between the wood dragon and the ground hibiscus, or the hibiscus material is too soft. Without strenuous effort, they are pulled up by the ground dragon; if there is a place where there is sometimes sound, sometimes it is not, this situation is mostly because the floor nails are smaller than the drill hole of the solid wood floor, and there are loose gaps between the floors. Caused, (and the quality of the floor itself is also related), half of the home after the completion of the decoration, when walking floor more or less will make a noise, but the location is different.