In winter, most households have been equipped with heating, and the storage heat exchanger has been loved by more and more people and it is also inseparable from it. However, many people do not know the characteristics of the water storage heat exchanger. Today we will share the characteristics of the water storage heat exchanger .

[What is a storage heat exchanger]

The tap water return process is not mixed with the warm water, and the cleanness of the tap water is drinkable. Multiple hot water supply can be used for washing, bathing, washing dishes, washing dishes, and laundry. It is heated by a heating circulatory system to meet people's daily life with hot water. The use of high-quality copper tubes and high-strength hot-dip galvanized tubes or stainless steel tubes as heat transfer materials, rapid heat exchange, high water temperature, and safe and durable. As long as there is heating and circulating water, there will be endless domestic hot water.

[Water storage type heat exchanger working principle ]

Pressure storage heat exchangers convert heated water to hot water using heat.

During heating, the water stored in the heat exchanger is at the same temperature as the warm water. The larger the heat exchanger volume, the more hot water is stored.

When you run out of a bucket of hot water, no need to manage, the heat exchanger automatically replenish cold water; after more than 10 minutes it can release hot water, because the proportion of hot water is light, the short-time conversion of hot water is concentrated on the top of the cylinder;

The amount of hot water is determined according to the heating temperature of the user and the length of time after the user is deactivated; the higher the heating temperature, the longer the deactivation time, the higher the temperature of the hot water stored in the cylinder until the heating temperature is reached, ensuring that you The hot water needed to save time and money.

[Water Storage Heat Exchanger Function]

The heat exchanger is mainly suitable for families in winter bathing, washing clothes, so that the family heating and bathing more perfect; kitchen washing dishes, vegetables, no electricity, no gas water heater, energy saving and environmental protection; also available for units, hotels, schools, etc. Use in public places.

[Water storage type heat exchanger structure]

The outside of the heat exchanger tube has heating inlet, outlet outlet, tap water inlet and outlet outlets. The inside of the cylinder is filled with tap water. The heating hot water heats the tap water of the cylinder through the coil in the cylinder body; there are two water distribution devices inside the two ends. , It can make tap water slowly injected into the heat exchanger cylinder, the hot and cold water are evenly separated, and hot water is pushed out of the cylinder to make it use effect.

Both inside and outside of the heat exchanger are made of high quality food grade stainless steel. After being shipped out, it is tested by hydraulic pressure of 1.2MPa. It is corrosion resistant, non-polluting, safe and reliable, and durable.

Heat exchangers are available in a variety of models. There are vertical, horizontal, ring type; there are barrel, box, combined, etc., can also be customized according to customer special requirements processing.

How to Install Water Heater
As long as there is a centralized heating or soil heating can be installed. The installation is very simple. Connect the water pipe and the inlet and outlet of the heating pipe to release the hot water with the same pressure as the tap water and the same temperature as the heating.
Before the heat exchanger is installed in the heating, the water temperature in the two groups is high, and at the same time, it will not affect the heating temperature of other radiators; if it is installed at the end, the water temperature should be lower than the inlet temperature by 10~20°C, which can not reach the use effect.

The heat exchanger should be flat, and the connection between the two upper and lower nozzles at both ends must be perpendicular to the ground. Tap water must go low and high to get hot water. The safety valve should be installed in the tap of the tap water. The direction of the water flow should be the same as the direction indicated by the safety valve.

Summary: The above Xiao Bian explained the characteristics of the water storage heat exchanger . I hope to be helpful.

Heating Installation Construction Installation Heating How to Avoid Decoration Contract Traps Water and Electricity Installation

Towel Shelf

Towel Shelf,Barhroom Towel Shelf,Villa Bathroom Towel Rack,Towel Shelf Rose Gold

Kaiping Jenor Sanitary Ware Co., Ltd , https://www.jenorsanitary.com