Comprehensive interpretation of the car tire knowledge mark diagram true and false identification! ! ! 1. Always check the tire pressure at least once a month to check the pressure of all tires under cooling conditions including the spare tire. If the air pressure is reduced too quickly, please find out the cause (for example: whether there are nails, cuts, aging of the valve rubber, cracking, etc.).
TR Industies endeavours to assimilate art into our daily life. Enenvironmental & safe aerosols and coatings to help
everybody enjoy creative moments, such as Fabric Paint ,Upholstery Paint,Wood Spray Paint,Graffiti Spray etc,can art/renew on fabrics,
leatherware, metalware, ceramics etc.
Please keep in mind that you must use a tire with the correct inflation pressure to drive the vehicle. The extreme pressure is too low and the tire will eventually “punctureâ€. The air pressure must be specified by the car manufacturer. This inflation standard can usually be found in the following locations: A. Vehicle user manual. B. The sticker next to the car seat. C. Storage drawer next to the driver's seat. D. The cylinder door is small.
2. Avoid bumping obstacles When the vehicle is driving at high speed, such as tire impacting potholes and other obstacles, the tire will cause severe crush deformation between the obstacle and the rim flange, which can cause the tire cord to break yarn and tire. The internal air is raised from the yarn break to form a bulge. If it is serious, it will cause the tire side to rupture and the tire suddenly deflated. Please keep in mind: Please pay attention when driving the vehicle. If you see obstacles in front (for example, potholes), please react in advance to avoid hitting obstacles. If you cannot avoid them, please slow down as much as possible. Special attention should be paid to tires with a low flat ratio.
3. Tire wear to wear indicator should be stopped. The wear indicator is provided at the depth of 1.6 mm in the tread groove. When the tire wears to the wear indicator, the tire must be replaced. Tires that use wear indicators are dangerous when driving on wetlands because drainage performance is greatly reduced, which can seriously affect wet grip.
Wheel Positioning and Balance If your tires are unevenly worn, for example, if the tire shoulders wear too fast over the rest of the tread, or if you notice excessive vehicle shake, the wheels may be poorly positioned or unbalanced. These conditions not only shorten the life of the tire, but also affect the handling of the vehicle, which may be dangerous. Please keep in mind: Please check wheel alignment and balance regularly
5. Preventing sun, oil, acid, and hydrocarbon damage to tires Because tires are rubber products, care must be taken not to contact chemicals such as oil, acid, or hydrocarbons when driving, parking, or storing tires. Deformation, softening, etc. When parking, it is recommended to park the vehicle in a cool place to avoid premature aging and damage to the tires.
6. Tire adjustment Because of the position of the drive wheel (front drive or rear drive) and the steering wheel, the wear of the tire front and rear wheels is different, so in order to obtain the best tire wear and longer service life, the tire Positioning is a must. Refer to the instruction manual provided by the vehicle manufacturer for guidance on tire alignment. Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Art & Craft Paint,Acrylic Paint Sets For Children,Waterproof Spray Craft Art Paint,Green Art & Craft Paint,Fabric Paint,Upholstery Paint,Wood Spray Paint,Graffiti Spray
Ding Wei Paint Technology. CO,ltd , https://www.toprankchemical.com