High-altitude platform rental high-altitude platform operation safety common sense high-altitude platform rental high-altitude platform operation safety common sense
Commercially pure or low-alloy nickel may contain very small amounts of alloying elements to absolutely none. By contrast nickel alloys contain significant amounts of added elements. Nickel and nickel alloys are both non-ferrous metals that are useful in a range of applications, most of which involve corrosion resistance and/or heat resistance.
Nickel Alloy alternatives to trademark [brand" names.
Alloy C276 alternative to Hastelloy C-276 and Hastelloy C
Aerial work platform considerations
1. Any work performed at a location of 2 meters or more above the high ground should be considered as a high work. Any work that can be done on the ground in advance must be done on the ground to minimize work at heights.
2, as a high-level workers must be healthy, suffering from mental illness, epilepsy and doctors identified high blood pressure, heart disease, etc. should not be engaged in high-level work, are not allowed to participate in high-level operations. When it is found that the staff has alcohol and lack of energy, it is forbidden to climb.
3, high-altitude operations must first build scaffolding or take measures to prevent team fall, before proceeding.
4. Work on dam crests, steep slopes, roofs, cliffs, poles, suspension bridges and other dangerous edges. Safety nets or protective railings should be installed on the air side, otherwise the staff must use seat belts.
5. Snow, gravel, and dirt on cliffs, steep slopes, or sidewalks must be cleaned frequently. A 1 meter high railing must be placed on the outside. Set 18 cm high side panels or bandits on the inside of the railing to prevent falling objects from hurting people.
6. Work without scaffolding or on scaffolding without railings. If the height is more than 1.5 meters, you must use seat belts or take other reliable safety measures.
7. The safety belt should be inspected before use, and the static load test should be carried out regularly (every 6 months). The test load is 225 kg, the test time is 5 minutes, and the test is checked for deformation, cracking, etc. Good test record. Unqualified seat belts should be disposed of in a timely manner.
8. The hook or rope of the seat belt should be hung on a strong and solid component or on a wire rope for hanging the seat belt. Do not hang on moving or unstable objects.
9. Tool bags should be used in all heights. Larger tools are applied to the sturdy components and are not allowed to be placed indiscriminately to prevent accidents from falling from high altitude.
10. When working in a high place, except for the relevant personnel, no one is allowed to walk or stay under the working place. The working place should be fenced or equipped with other protective devices to prevent falling objects from hurting people. If working on a grille platform, in order to prevent tools and equipment from falling, planks should be laid.
11. It is not allowed to throw tools and materials up and down. It is necessary to use ropes to fasten and hoist down, so as not to injure the staff below or destroy the scaffolding.
12. When working on the upper and lower floors at the same time, a tight and strong protective partition, shed or other isolation facilities must be set up in the middle, and the staff must wear a safety helmet.
13. In the winter, work at an altitude of less than minus ten degrees. If necessary, there should be a rest place near the construction area. The heating equipment should be managed by a special person and pay attention to fire prevention.
14. In the severe winds of level 6 and above, as well as severe weather such as heavy rain, thunder, and fog, stop working in the open air.
15. It is forbidden to work on unsturdy structures (such as asbestos tile roofs). In order to prevent mis-entry, warning signs should be placed at the necessary locations for this structure.
Aerial work platform safety protection
helmet
1. Before using the helmet, check whether the cap, cap lining and cap are complete.
2. Adjust the helmet lining before using the helmet so that the parts of the cap lining are separated from the shell by a certain space.
3. The cap should be adjusted according to the shape of the human head to prevent the hat from slipping in front of the line when the head is lowered.
4. It is strictly forbidden to combine the top layers of the two layers of the helmet.
5, the helmet should be tightly worn and worn, and the cap should be tied under the jaw and fastened.
6. The effective period of the helmet is calculated from the date of completion of the product manufacturing. The plastic cap is no more than two and a half years, and the FRP cap is no more than three and a half years.
seat belt
1. The seat belt must be inspected by the inspection unit every six months before it can be used.
2. When working in the following conditions, the seat belt should be worn:
(1) It is possible to work at heights, and when entering the workplace, the body must wear a seat belt;
(2) When working at heights exceeding two meters in height;
(3) Working on scaffolding without scaffolding or without barriers, when the height exceeds 1.5 m;
(4) When working on a sloping roof;
(5) Flat-top houses, when there is no fence within 1.2 m from the edge of the roof or the opening of the roof;
(6) any suspended platform or workbench;
(7) Any guardrail on which the paving is incomplete on the scaffold;
(8) close to the ladder near the roof or the ground opening;
(9) When there is no reliable fall protection measures in the high place.
3. How to use the seat belt correctly:
(1) To tighten the belt, the waist buckle assembly must be fastened;
(2) When using the seat belt for hanging work, the hook should not be hooked directly on the seat belt rope, and should be hooked on the hanging loop of the seat belt rope;
(3) It is forbidden to hang the seat belt on a member that is not strong or has a sharp angle;
(4) Using the same type of seat belt, the parts cannot be replaced without authorization;
(5) Seat belts that are severely impacted, cannot be used even if the appearance has not changed;
(6) It is strictly forbidden to use heavy belts to transmit heavy objects;
(7) The seat belt should be hung on the top firmly and reliably, and the height should not be lower than the waist.
safety rope
1. In order to ensure that the high-altitude workers always have safety guarantee during the movement process, when carrying out special dangerous operations, it is required to hang on the safety rope while fastening the seat belt.
2. It is forbidden to use hemp rope to make a safety rope.
3, use a long rope of more than 3 meters to add a buffer.
4. A safety rope cannot be used by two people at the same time.
Differential protector
1. The self-locking device should be inspected before use.
2. The self-locking hook should be hung on the seat belt metal ring.
3. The self-locking device that has been seriously impacted should be stopped.
Dongguan Shuncheng High-altitude Machinery provides direct-car rental, high-altitude car rental, straight-arm crane rental, bridge inspection car rental, high-altitude platform rental, arm-type aerial vehicles, hydraulic lift rental, lift rental and other types of high-altitude machinery rental services !
Information Sources:
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Nickel And Nickel Alloys
Nickel is a versatile, highly corrosion resistant element that will alloy with most metals. Due to its corrosion resistance, nickel is used to maintain product purity in the processing of foods and synthetic fibers. It is highly resistant to various reducing chemicals and is unexcelled in resistance to caustic alkalies. In addition, nickel has good thermal, electrical and magnetostrictive properties. Relatively high thermal conductivity of this metal has lead to its frequent use for heat exchangers
Alloy B-2 alternative to Hastelloy B-2
Alloy C-22 alternative to Hastelloy C-22
Alloy X alternative to Hastelloy X and Inconel HX
Alloy 20 alternative to Carpenter 20 and Incoloy 20
Alloy718 alternative to Inconel 718
Alloy 800 alternative to Incoloy 800
Alloy 800H/HT alternative to Incoloy 800H/HT
Alloy 400 alternative to Monel 400
Alloy K-500 alternative to Monel K-500
Alloy 625 alternative to Inconel 625
Alloy 600 alternative to Inconel 600
Alloy 601 alternative to Inconel 601
Nickel Alloy Heat Exchanger Tube
Nickel Alloy Heat Exchanger Tube,Nickel Alloy Seamless Tube,Nickel Alloy Asme Tube
YUHONG GROUP CO.,LIMITED , https://www.jessro-pipefittings.com